Generated by All in One SEO v4.9.5.1, this is an llms.txt file, used by LLMs to index the site.

# CYBRES

Home

## Sitemaps

- [XML Sitemap](https://cybres.eu/sitemap.xml): Contains all public & indexable URLs for this website.

## Pages

- [Services](https://cybres.eu/services/) - Testing Services Testing experimental technologies with plants and microorganisms Various technologies for plant stimulation, water treatment (e.g. hydrodynamic cavitation) or biophysical interactions can be tested with plants and microorganisms (like Baker’s yeast saccharomyces cerevisiae) to assess their effects on biological organisms.Tests can be conducted with two different parameter sets: with plants with a shortened development
- [Electrochemical Impedance Spectrometer](https://cybres.eu/electrochemical-impedance-spectrometer/) - Compact device for differential electrochemical impedance spectroscopy; optical or electromagnetic excitation; spectral, correlation, distortion and regression analysis
- [Shop](https://cybres.eu/shop/)
- [Contur](https://cybres.eu/contur/) - Contrur: cone-shaped geometric structures Description “Contur” is an experimental product developed for a technological and scientific exploration of the shape effect that can affect biological, chemical, electronic and environmental systems. The system consists of cones inserted into each other on 0, 1/3 or 1/2 of their height (the focus position of 0%, 33% or 50%).
- [Manual Stencil Printer](https://cybres.eu/manual-stencil-printer/) - Manual Stencil Printer Description CYBRES stencil printer (CYBRES SP2421, SP2442) is ideal for prototyping small-series circuit boards with fine-pitch SMD components. It does not require the framed stencil and can operate with any 80µm-250µm steel stencils. Adjustment of PCB position and application of soldering paste is performed manually. printing area: SP2421: 245×210 mm (max stencil
- [Data protection](https://cybres.eu/privacy/) - Data protection declaration German versionUnless stated otherwise below, the provision of your personal data is neither legally nor contractually obligatory, nor required for conclusion of a contract. You are not obliged to provide your data. Not providing it will have no consequences. This only applies as long as the processing procedures below do not state
- [General terms and conditions](https://cybres.eu/general-terms-and-conditions/) - Standard Business Terms and customer information German VersionI. Standard business terms§ 1 Basic provisions(1) The following business terms are applicable to all the contracts, which you conclude with us as a supplier (CYBRES GmbH) via the https://www.cybres.eu website. Unless otherwise agreed upon, the inclusion, if necessary, of your own conditions is ruled out.(2) A ‘consumer’
- [Wiederrufsrecht](https://cybres.eu/wiederrufsrecht/) - Widerrufsrecht für Verbraucher (Verbraucher ist jede natürliche Person, die ein Rechtsgeschäft zu Zwecken abschließt, die überwiegend weder ihrer gewerblichen noch ihrer selbstständigen beruflichen Tätigkeit zugerechnet werden können.)WiderrufsbelehrungWiderrufsrechtSie haben das Recht, binnen 14 Tagen ohne Angabe von Gründen diesen Vertrag zu widerrufen.Die Widerrufsfrist beträgt 14 Tage ab dem Tag,– an dem Sie oder ein von Ihnen
- [Right of withdrawal & withdrawal form](https://cybres.eu/right-of-withdrawal-withdrawal-form/) - Revocation right for consumers (A ‘consumer’ is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)Instructions for revocationRevocation rightYou have the right to revoke this contract within 14 days without specifying any reasons.The revocation period is 14 days with effect
- [Bezahlung und Versand](https://cybres.eu/bezahlung-und-versand/) - Zahlung und Versand Es gelten folgende Bedingungen:Die Lieferung der Ware erfolgt weltweit.Versandkosten (inklusive gesetzliche Mehrwertsteuer)Lieferungen im Inland (Deutschland): Wir berechnen die Versandkosten nach Versandgewicht:https://www.dhl.de/de/privatkunden.htmlLieferungen ins Ausland:Wir berechnen die Versandkosten ins Ausland nach Versandgewicht:https://www.dhl.de/de/privatkunden.htmlLieferfristenBei individuell nach Kundenwunsch gestalteten Waren erfolgt die Erstellung der Korrekturvorlage innerhalb von 3-5 Tagen nach Vertragsschluss, die Ausführung der Gestaltungsarbeiten sowie die Lieferung
- [Packaging/WEEE](https://cybres.eu/packaging-law/) - WEEE-Reg.-Nr. DE 81625900Information for battery disposal In connection with the sale of batteries or with the delivery of devices that contain batteries, we are under obligation to bring the following to your attention:As the end user, you are legally under obligation to return used batteries. You can return old batteries, which offer or have offered
- [Zur Kasse](https://cybres.eu/zur-kasse/)
- [Warenkorb](https://cybres.eu/warenkorb/)

## My Templates

- [Default Kit](https://cybres.eu/?elementor_library=default-kit)
- [startPage](https://cybres.eu/?elementor_library=startpage-3) - advancedphytosensing systems Produkt Kategorien DURCHSUCHEN SIE DEN Webstore NACH KATEGORIEN. phytosensoren Erkunde Environmental monitoring Control of devices ElectrochemicalSensors Produkt Kategorien Different electrodes
- [startPage](https://cybres.eu/?elementor_library=startpage-2) - advancedphytosensing systems Produkt Kategorien DURCHSUCHEN SIE DEN Webstore NACH KATEGORIEN. phytosensoren Erkunde Environmental monitoring Control of devices ElectrochemicalSensors Produkt Kategorien Different electrodes
- [startPage](https://cybres.eu/?elementor_library=startpage) - advancedphytosensing systems Produkt Kategorien DURCHSUCHEN SIE DEN Webstore NACH KATEGORIEN. phytosensoren Erkunde Environmental monitoring Control of devices ElectrochemicalSensors Produkt Kategorien Different electrodes
- [startPage](https://cybres.eu/?elementor_library=startpage-2) - advancedphytosensing systems Produkt Kategorien DURCHSUCHEN SIE DEN Webstore NACH KATEGORIEN. phytosensoren Erkunde Environmental monitoring Control of devices ElectrochemicalSensors Produkt Kategorien Different electrodes
- [startPage](https://cybres.eu/?elementor_library=startpage) - advancedphytosensing systems Produkt Kategorien DURCHSUCHEN SIE DEN Webstore NACH KATEGORIEN. phytosensoren Erkunde Environmental monitoring Control of devices ElectrochemicalSensors Produkt Kategorien Different electrodes
- [Product categories](https://cybres.eu/?elementor_library=product-categories) - Product categories Browse through the webstore by categories
- [Maintenance mode](https://cybres.eu/?elementor_library=maintenance-mode) - Maintenance Mode We are not ready yet !
- [CybresShop_17.10.18](https://cybres.eu/?elementor_library=cybresshop_17-10-18) - Beyond Technology Shop Now Our Website Measurment devices Explore Mechanical elements Explore Generators Explore Activated Materials Explore accessories Explore
- [Featured section with button](https://cybres.eu/?elementor_library=featured-section-with-button) - Featured collection Discover more

## Products

- [MU EIS - Electrochemical Impedance Spectrometer with Optical Excitation](https://cybres.eu/store/measurements/systems/eis/) - Electrochemical Impedance Spectrometer (open electrodes version)
- [M.I.N.D. - Mind Influence Notification Device (basic version)](https://cybres.eu/store/measurements/mind/mind-basic/) - Measurement device for objective evaluation and neurocognitive training of mind practices such as Yoga, Reiki or Meditation
- [Biomass sensor: compare/monitor biomass growth](https://cybres.eu/store/measurements/systems/biomasssensor/) - Biomass sensors measure the growth dynamics of biomass, the differential sensor compares the biomass dynamics of two crop samples. These sensors use a high air-water dielectric contrast to measure the wet biomass. Differential sensor is suitable for phenotyping purposes; exploring effects of inoculation, stimulation, inhibition, stress, genetic modifications and other factors by comparing control and
- [CYBRES Phytosensor "AI biolab": AI phenotyping, biosensors, stress detection, monitoring plant physiology](https://cybres.eu/store/measurements/systems/phytosensor-ai-biolab/) - novel approach for sensor-rich bio-AI applications: the phytosensor collects large amounts of biological data to train Artificial Intelligence systems, “desktop biological laboratory” plants as biosensors: any plant, long-term use, minimal maintenance – assess and monitor the biological viability of environment agricultural use: fast phenotype testing of various plants, stress detection, monitoring plant physiology, AI phenotyping feature in-depth
- [M.I.N.D. - Mind Influence Notification Device (pro version)](https://cybres.eu/store/measurements/mind/mind-pro/) - Measurement device for objective evaluation and neurocognitive training of mind practices such as Yoga, Reiki or Meditation
- [Phytosensor with electrophysiological electrodes](https://cybres.eu/store/measurements/systems/phytosensor-basic/) - The system for measuring physiological and electrophysiological reactions of plants.
- [CYBRES SP2442 Manual Stencil Printer](https://cybres.eu/store/mechanical-devices/stencil-printer/cybres-sp2442-manual-stencil-printer/) - Manual stencil printer for prototyping small-series circuit boards with fine-pitch SMD components without framed stencil.
- [USB cable](https://cybres.eu/store/measurements/adapters/usb-cable/) - USB 2.0 cable with ferrite ring, type A-B, 1 meter, suitable for the EIS spectrometer.
- [Test connector 26](https://cybres.eu/store/measurements/adapters/test-connector-26/) - Test 26-pin connector for the measurement module MU34/MU34T with two black/red banana plugs. It can be used for e.g. calibration purposes.
- [Thermo Insulated Box](https://cybres.eu/store/measurements/mind/t-box/) - Thermo insulating foam container for M.I.N.D., neopor®, volume: 12,5 l, wall thickness: 5 cm
- [Set: thermo filler & holder](https://cybres.eu/store/measurements/mind/filler-set/) - Set for passive thermostabilization setup, thermo filler 2x1.5L & holder for electrodes
- [Thermo Insulated Box-Systainer®](https://cybres.eu/store/measurements/mind/ts-box/) - Insulated-systainer® T-Loc III - light grey with neopor®, used as a passive thermostabilization box in the pro version of M.I.N.D., volume 8.3 liters, wall thickness 3 cm
- [Set of 15 ml containers](https://cybres.eu/store/measurements/accessories/set-of-15-ml-containers/) - Set of 15 ml containers, 10 pieces in plastic bag, material - PP.
- [Set of 100ml containers](https://cybres.eu/store/measurements/accessories/set-of-100ml-containers/) - Set of 100 ml containers, 9 pieces in plastic bag, material - PP.
- [Replacement cups](https://cybres.eu/store/measurements/accessories/replacement-cups/) - Replacement cups for the EIS spectrometer.
- [Output cone](https://cybres.eu/store/mechanical-devices/generators/output-cone/) - Structural element required for passive generators based on shape effects and active E/H generators.
- [Phytosensor: transpiration sensor](https://cybres.eu/store/measurements/electrodes/phytosensor-transpiration-sensor/) - This sensor belongs to the 'phytosensor-system' and is designed to measure the level of leaves transpiration. The sensor is connected to the MU34 or MU34T module with the connector 26.
- [Replacement container for EIS spectrometer](https://cybres.eu/store/measurements/accessories/replacement-container-for-eis-spectrometer/) - Replacement case for the EIS spectrometer.
- [Holding assistant](https://cybres.eu/store/mechanical-devices/holding-assistant/) - The holder is intended for fixing tools, blocks of devices, emittors, sensors or similar objects. Two vertical holders can be simultaneously fixed on the upper horizontal bar, which enables mounting two objects with accurate position in relation to each other.
- [MU EIS – Electrochemical Impedance Spectrometer with Active Thermostat](https://cybres.eu/store/measurements/systems/eis-therm/) - Electrochemical Impedance Spectrometer (version with thermostabilization of samples)
- [Generator "Contur" 7](https://cybres.eu/store/mechanical-devices/generators/generator-contur-7/) - The generator “Contur” is an experimental product developed for a technological and scientific exploration of the impact of geometric shapes on diverse biological, chemical, electronic and environmental systems.
- [High resolution temperature sensor](https://cybres.eu/store/measurements/electrodes/high-resolution-temperature-sensor/) - The external high-resolution temperature sensor (Texas Instruments LM35CA) is connected to the side connector of the EIS spectrometer.
- [High-resolution environmental data logger](https://cybres.eu/store/measurements/electrodes/high-resolution-environmental-data-logger/) - This external sensor module measures air humidity, illumination and temperature.
- [Holder for containers](https://cybres.eu/store/measurements/accessories/holder-for-containers/) - Stand for two 15 ml containers with or without electrodes), size - 125x45x50 mm, material - acrylic 3mm, the distance between the containers is 43mm.
- [Generator "Contur" 5](https://cybres.eu/store/mechanical-devices/generators/generator-contur-5/) - The generator “Contur” is an experimental product developed for a technological and scientific exploration of the impact of geometric shapes on diverse biological, chemical, electronic and environmental systems.
- [Element 2xS copper](https://cybres.eu/store/mechanical-devices/generators/element-2xs-copper/) - Structural elements required for passive generators based on the shape effect and active E/H generators.
- [Element 2xM copper](https://cybres.eu/store/mechanical-devices/additional-parts/element-2xm-copper/) - Structural elements required for passive generators based on shape effects and active E/H generators.
- [Element S copper](https://cybres.eu/store/mechanical-devices/additional-parts/element-s-copper/) - Structural element required for passive generators based on shape effects and active E/H generators.
- [EIS electrodes E15DTES-26](https://cybres.eu/store/measurements/electrodes/eis-electrodes-e15dtes-26/) - Passive EIS electrodes for 15 ml containers with 26 pin connector for the EIS spectrometer (modules MU3.3, MU3.4, MU3.4T).
- [EIS electrodes E15DTES-26S](https://cybres.eu/store/measurements/electrodes/eis-electrodes-e15dtes-26s/) - Passive EIS electrodes for 15 ml containers with 26 pin connector for the EIS spectrometer (modules MU3.3, MU3.4, MU3.4T).
- [EIS electrodes E15DT-15](https://cybres.eu/store/measurements/electrodes/electrodes-e15dt-15/) - Passive EIS electrodes for 15 ml containers with 15 pin connector for the EIS spectrometer (measurement module MU3.2).
- [EIS electrodes E15D-5](https://cybres.eu/store/measurements/electrodes/eis-electrodes-e15c/) - Passive EIS electrodes for 15 ml containers with 5 pin connector for the EIS spectrometer.
- [EIS electrodes E100DT-15](https://cybres.eu/store/measurements/electrodes/eis-electrodes-e100dt-15/) - Passive EIS electrodes for 100 ml containers with 15 pin connector for the EIS spectrometer (measurement module MU3.2, biosensor module).
- [CYBRES SP2421 Manual Stencil Printer](https://cybres.eu/store/mechanical-devices/stencil-printer/cybres-sp2421-manual-stencil-printer/) - CYBRES stencil printer is ideal for prototyping small-series circuit boards with fine-pitch SMD components. It does not require the framed stencil and can operate with any 80µm-250µm steel stencils. Adjustment of PCB position and application of soldering paste is performed manually.
- [Connector 5](https://cybres.eu/store/measurements/adapters/connector-5/) - Spare connector for EIS spectrometer for 5 contacts. It is used for connecting electrodes and for the side connector (connection of external sensors).
- [Connector 26](https://cybres.eu/store/measurements/adapters/connector-26/) - Spare connector for measuring module MU34 and MU34T for 26 contacts. It is used to connect electrodes and external sensors.
- [Adapter 26 to 5](https://cybres.eu/store/measurements/adapters/adapter-26-to-5/) - Adapter between 26-pin connector of the measurement module MU34/MU34T and 5-pin connector. E5C electrodes or external sensors to be connected to MU34/MU34T by using this adapter.
- [Adapter A26-15](https://cybres.eu/store/measurements/adapters/adapter-26-to-15/) - Adapter between 26-pin connector of the measurement module MU34/MU34T and 15-pin connector. E100C electrodes or external sensors to be connected to MU34/MU34T by using this adapter.
- [Adapter 26 to 26-5](https://cybres.eu/store/measurements/adapters/adapter-26-to-26-5/) - Adapter between 26-pin connector of the measurement module MU34/MU34T and 26 pin connector + 5-pin connector. Adapter 26-to-26-5 can be used to connect open EIS Electrodes with 26 pin plug and external sensors with 5 pin plug to MU34/MU34T. Input for the external temperature sensor is routed to the 5-pin connector.

## MailPoet Page

- [MailPoet Page](https://cybres.eu/?mailpoet_page=captcha) - [mailpoet_page]
- [MailPoet Page](https://cybres.eu/?mailpoet_page=captcha) - [mailpoet_page]
- [MailPoet Page](https://cybres.eu/?mailpoet_page=subscriptions) - [mailpoet_page]

## Categories

- [Projects](https://cybres.eu/category/projects/) - Different projects of CYBRES
- [Products](https://cybres.eu/category/products/) - Different products of CYBRES

## Tags

- [online data](https://cybres.eu/tag/online-data/)
- [research](https://cybres.eu/tag/research/)
- [biofeedback](https://cybres.eu/tag/biofeedback/)
- [optimization](https://cybres.eu/tag/optimization/)
- [microgreens](https://cybres.eu/tag/microgreens/)
- [wheatgrass](https://cybres.eu/tag/wheatgrass/)
- [plants](https://cybres.eu/tag/plants/)
- [biosensor](https://cybres.eu/tag/biosensor/)
- [phytosensor](https://cybres.eu/tag/phytosensor/)
- [measurements](https://cybres.eu/tag/measurements/)
- [vertical farm](https://cybres.eu/tag/vertical-farm/)
- [robotics](https://cybres.eu/tag/robotics/)
- [underwater robots](https://cybres.eu/tag/underwater-robots/)
- [swarm robots](https://cybres.eu/tag/swarm-robots/)
- [Jasmine robot](https://cybres.eu/tag/jasmine-robot/)
- [environment](https://cybres.eu/tag/environment/)
- [impedance spectroscopy](https://cybres.eu/tag/impedance-spectroscopy/)
- [excitation spectroscopy](https://cybres.eu/tag/excitation-spectroscopy/)
- [EIS](https://cybres.eu/tag/eis/)
- [electronics](https://cybres.eu/tag/electronics/)
- [SMD assembling](https://cybres.eu/tag/smd-assembling/)

## Product categories

- [Contur](https://cybres.eu/product-category/mechanical-devices/generators/) - Active and passive generators, geometric structures based on the shape effect, electromagnetic emitters.
- [Additional parts](https://cybres.eu/product-category/mechanical-devices/additional-parts/) - Replacement or additional parts for generators
- [Measurements](https://cybres.eu/product-category/measurements/) - Different measurement devices, electrodes, convertors, connectors and sensors
- [Measurement systems](https://cybres.eu/product-category/measurements/systems/)
- [Mechanical devices](https://cybres.eu/product-category/mechanical-devices/) - Mechanical devices to simplify the user’s work in various areas. These devices have been designed to be as simple as possible to ensure a solid and robust operation.
- [Stencil Printer](https://cybres.eu/product-category/mechanical-devices/stencil-printer/)
- [Accessories](https://cybres.eu/product-category/measurements/accessories/) - Accessories for our products
- [Electrodes & Sensors](https://cybres.eu/product-category/measurements/electrodes/) - Electrodes for differential electrochemical impedance spectroscopy.
- [Adapters, connectors, cables](https://cybres.eu/product-category/measurements/adapters/)
- [M.I.N.D.](https://cybres.eu/product-category/measurements/mind/) - M.I.N.D. system and components

## Product tags

- [Stencil Printer](https://cybres.eu/product-tag/stencil-printer/)